- Size: 128X75X132.5mm
Material: plastic cap and aluminum screw and nut
- Application:application to Arc-protecting hard ware against lightening-caused breaking of insulation conductors in 10kv distribution network.
1. Simple installation, low resistance and heat uneasily. The special bolts can control the connectors invariably for superior electric connection and less wire spoilage, the normal service of the stilt insulating wires.
3. Sealing structure and good insulation. The connector are filled insulating oil, as a result, the sealing structure conductor can increase the insulating intensity and safety.
4. Wide range of application. They are applicable for the branch connection of copper aluminum wires or of inequality -diameter wires, the direct connection of equality-diameter wires and the transit connection of copper aluminum wires.
1. Choose the right connector to fit. Put the straight wires in the right places then screw them tightly by hand.
2. Tighten the nuts equally with the insulation gloves and spanner.
3. Don't stop screwing the nuts until the cap of the moment nut is screwed off.
|Type||Applicable voltage(kv)|| Dimentions(MM)||Section of branch cable(mm2)|