Gold Member Since 2012
Audited Supplier

Piercing Connnector, Piercing Clamp, Pjjc10 Type Piercing Connector manufacturer / supplier in China, offering Pjjcl Non-Conventional Piercing Connector (1KV), Fuse Cutout with 24-36kv Voltage (FSC-27; FSC-36), Outdoor Expulsion Drop-out Type Fuse Cutout and so on.

(/ )

Supplier Homepage Product Electric power fitting Others Electric power fitting Pjjcl Non-Conventional Piercing Connector (1KV)

Pjjcl Non-Conventional Piercing Connector (1KV)

FOB Price: US $0.5-10 / Piece
Min. Order: 100 Pieces
Min. Order FOB Price
100 Pieces US $0.5-10/ Piece
Get Latest Price
Port: Shanghai, China
Production Capacity: 50000PCS/Month
Payment Terms: L/C, T/T, D/P, Western Union
Basic Info
  • Model NO.: PJJCL
  • Standard: GB
  • Type: Piercing Clamp
  • Material: Plastic Cap and Aluminum Screw
  • Transport Package: Carton
  • Origin: Shanghai, China(Mainland)
  • Technics: Nickel-Plated
  • Usage: Line Fittings
  • Bolt Number: 2
  • Trademark: None
  • Specification: 85.3x85.3x111mm
  • HS Code: 8538900000
Product Description
Product Info
  • Parameters:
  • Size: 85.3x85.3x111mm
    Bolt number: 2
    Material: plastic cap and aluminum screw and nut
  • Application:suitable for 1KV and less than 1KV electricity distribution system(3-core or 4-core insulation cable):application to insulation cable with a section sector angle from 90ºC to 120ºC
  • Performance and characteristics
1. Simple installation, low resistance and heat uneasily. The special bolts can control the connectors invariably for superior electric connection and less wire spoilage, the normal service of the stilt insulating wires.
3. Sealing structure and good insulation. The connector are filled insulating oil, as a result, the sealing structure conductor can increase the insulating intensity and safety.
4. Wide range of application. They are applicable for the branch connection of copper aluminum wires or of inequality -diameter wires, the direct connection of equality-diameter wires and the transit connection of copper aluminum wires.
  • Installation steps:
1. Choose the right connector to fit. Put the straight wires in the right places then screw them tightly by hand.
2. Tighten the nuts equally with the insulation gloves and spanner.
3. Don't stop screwing the nuts until the cap of the moment nut is screwed off.
  • Application:
Application to 10KV overhead electricity distribution system.
Typeapplication conductor: main line/branch line(M2)Mentions(MM)Normal current (A)Bolt numberMainly application
PJJCL-240/185150-240/ 120-18585.3X85.3X1113992the connection of main circuity and cable branch
PJJC10-240/150 95-240/50-120 80.5X82X111288 2

Send your message to this supplier
Mr. Frank Xu
To: Mr. Frank Xu

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category